SeeSnake CS and CSx series monitors and the LT-1000 laptop interface use the CUI SDI65-19-UD-P5 power adapter, which is widely available through online electronics suppliers like:
The part number listed above is for the International version of the adapter which does not include the AC power cord. If you don't have the original power cord that came with your adapter you will need to order the correct power cord for your country. The cord has a standard AC to IEC 320-C8 connector and is widely used for laptops, battery chargers, etc. (USA version shown below).
If you can't find the CUI model listed above ANY adapter with these specs will work:
Voltage - Input | 90 ~ 264 VAC |
Voltage - Output | 19V |
Power (Watts) | 65 W |
Output Connector | Barrel Plug, 2.1mm I.D. x 5.5mm O.D. x 9.5mm, CENTER PIN POSITIVE |
Input Connector | IEC 320-C8 (standard connector for laptop power supplies) |
| Operating Temperature | 0°C ~ 40°C |
Approval Agency | CB Scheme, CCC, CSA, EN, FCC, IEC, PSE, RCM, UL |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article